Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » CMM Products » VB-2000-CPM My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
CHROME STEEL BALL 0.125", 3.175 mm, 1/8" Grd:10
CHROME STEEL BALL 0.125", 3.175 mm, 1/8" Grd:10
$7.5000
VEE BLOCK, 2" CYLINDRICAL POST MOUNTED
[VB-2000-CPM]
 $157.5000 

THE LARGE CYLINDRICAL POST-MOUNTED VEE BLOCK (OUR PART NUMBER VB-2000-CPM) IS A VERY HEAVY LOAD-CARRYING DEVICE.

IT IS BUILT AROUND A TWO-INCH DIAMETER CYLINDRICAL ENVELOPE.

THE CYLINDRICAL MOUNTING POST IS PRECISION GROUND, TO THREE QUARTERS OF AN INCH (3/4" 0.750", 19.05 MM) IN DIAMETER, PLUS OR MINUS .003" (.0762 MM) AND IS THREE QUARTERS OF AN INCH (3/4", 0.75", 19.05 MM) LONG.

THE ADJACENT FLAT FLANGE IS PRECISION GROUND FLAT AND SQUARE TO THE POST.

THIS DEVICE IS DESIGNED FOR UNIVERSAL MOUNTING FROM EITHER THE FRONT OR FROM BEHIND.

THE CENTER OF THE POST IS DRILLED THROUGH AND THREADED TO ACCEPT A FASTENER THAT IS THREE EIGHTHS OF AN INCH (3/8", 0.375", 9.5 MM) DIAMETER BY SIXTEEN THREADS PER INCH. THIS CAN BE USED TO HOLD IT DOWN FROM THE REAR.

THE DRILLED CENTER HOLE OF THE VEE BLOCK IS COUNTERBORED IN THE FRONT TO ACCEPT A FIVE-SIXTEENTHS ( 5/16" ) OF AN INCH (7.9 MM) DIAMETER SOCKET HEAD CAP SCREW.

THIS ARRANGEMENT CAN BE USED TO CLAMP IT DOWN FROM THE FRONT.

THIS DEVICE IS COMPATIBLE WITH LOAD SPHERES FROM ONE AND ONE QUARTER ( 1 1/4" ) OF AN INCH (32 MM) TO TWO-INCH (51 MM) DIAMETER.

THE INCLUDED ANGLE OF THIS VEE BLOCK IS 90 DEGREES. THE FLAT PRISMATIC SURFACES OF THIS VEE BLOCK ARE PRECISION GROUND WITH THE FACE OF THE GRINDING WHEEL NOT THE PERIPHERY. THIS TECHNIQUE BREAKS UP THE LAY OF THE SURFACE TEXTURE AND GIVES THESE VEE BLOCKS FAR SUPERIOR REPEATABILITY.

THESE VEE BLOCKS ARE MANUFACTURED FROM A VERY HIGH CHROME, HIGH CARBON, MARTENSITIC STAINLESS STEEL. THIS ULTRA FINE-GRAINED MATERIAL IS HARDENED TO 58 HRC MINIMUM.

THESE VEE BLOCKS ARE HIGHLY MAGNETIC.

FOR A HEAVY LOAD CAPABILITY, SEE ALSO "CANOE SPHERE."

For more information, please visit this products webpage.
This product was added to our catalog on Thursday 29 May, 2008.
Quantity (Total Balls):
Customers who bought this product also purchased
CANOE SPHERE, 2 INCH DIAMETER
CANOE SPHERE, 2 INCH DIAMETER
Shopping Cart more
0 items

Copyright © 2017 Bal-tec
Powered by osCommerce