Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » CMM Products » VB-375-SM My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
CHROME STEEL BALL 0.125", 3.175 mm, 1/8" Grd:10
CHROME STEEL BALL 0.125", 3.175 mm, 1/8" Grd:10
$7.5000
VEE BLOCK, 0.375" ( 3/8") SURFACE MOUNTED
[VB-375-SM]
 $46.0000 

THIS DEVICE IS DESIGNED TO ACCEPT SPHERES FROM FIVE SIXTEENTHS OF AN ( 5/16 INCH ) ( 0.3125 INCH ) [ 7.9MM ] TO ONE HALF INCH ( 1/2 INCH )( 0.5 INCH ) [ 12.7 MM ] DIAMETER. THREE EIGHTS OF AN INCH ( 0.375 INCH ) [ 9.5MM ] IS THE NOMINAL DIAMETER. THIS IS OUR PART # VB-375-SM.

THE FLAT MOUNTING SURFACE ON THE BACK SIDE OF THIS PART IS A PRECISION FLAT LAPPED ANNULESS.

THE INCLUDED ANGLE OF THIS VEE BLOCK IS 90 DEGREES.

THE MAJOR DIAMETER OF THIS VEE BLOCK IS THREE QUARTERS OF AN INCH ( INCH )( 0.75 INCH) [19MM].

THE FLAT FACES OF THE VEES OF THIS DEVICE ARE PRECISION GROUND ON A SPECIAL CUSTOM BUILT MACHINE WITH THE FACE OF THE GRINDING WHEEL, NOT THE PERIPHERY. THE RESULTING CRISSCROSS PATTERN BREAKS UP THE LAY OF THE SURFACE TEXTURE TO GIVE THIS COUPLE FAR SUPERIOR REPEATABILITY.

THIS DEVICE IS DESIGNED FOR SURFACE MOUNTING WITHOUT ANY PROTRUSIONS ON THE BACK SURFACE. IN ORDER TO ACHIEVE GREATER RIGIDITY THE OUTSIDE, THREE QUARTER INCH ( 3/4", 0.75", 19 MM) DIAMETER CAN BE EPOXY GLUED INTO A SHALLOW COUNTER BORE.

THE HOLD DOWN ARRANGEMENT ON THIS DEVICE CONSISTS OF TWO # 6-32 THREADED HOLES THAT ARE PRECISION SPACED 1/2 INCH, (0.5 INCH) [12.7 MM] APART.

THE VB-375-CPM HAS A CENTER THROUGH HOLE THAT IS ONE EIGHT OF AN INCH ( 1/8 INCH ) (0.125 INCH) [3.2MM] DIAMETER.

For more information, please visit this products webpage.
This product was added to our catalog on Tuesday 29 December, 2009.
Quantity (Total Balls):
Customers who bought this product also purchased
MONOLITHIC TRIHEDRAL, 0.75", 3/4"
MONOLITHIC TRIHEDRAL, 0.75", 3/4"
TRUNCATED BALL WITH BLIND HOLE, STAINLESS STEEL, 0.5000", ( 1/2" ), 12.70 MM
TRUNCATED BALL WITH BLIND HOLE, STAINLESS STEEL, 0.5000", ( 1/2" ), 12.70 MM
FLAT CYLINDER, POST MOUNTED 3/4" ( 0.75", 19.05 MM )
FLAT CYLINDER, POST MOUNTED 3/4" ( 0.75", 19.05 MM )
FULL BALL WITH COUNTERBORED HOLE, STAINLESS STEEL, 1.000", ( 1"), 25.4  MM
FULL BALL WITH COUNTERBORED HOLE, STAINLESS STEEL, 1.000", ( 1"), 25.4 MM
TRUNCATED BALL, STAINLESS STEEL, 1.000", ( 1"), 25.4 MM
TRUNCATED BALL, STAINLESS STEEL, 1.000", ( 1"), 25.4 MM
TRUNCATED BALL WITH COUNTER BORED HOLE, STAINLESS STEEL, .7500", ( 3/4" ), 19.05 MM
TRUNCATED BALL WITH COUNTER BORED HOLE, STAINLESS STEEL, .7500", ( 3/4" ), 19.05 MM
Shopping Cart more
0 items

Copyright © 2017 Bal-tec
Powered by osCommerce