Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » CMM Products » BLK-45 My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
CHROME STEEL BALL 0.125", 3.175 mm, 1/8" Grd:10
CHROME STEEL BALL 0.125", 3.175 mm, 1/8" Grd:10
$7.5000
BLOCK, 45 DEGREE
[BLK-45]
 $120.0000 

THE 45 DEGREE ANGLE BLOCK ( PART NUMBER BLK-45 ) IS USED TO HOLD PROBE CHARACTERIZING SPHERES INCLINED AT 45 DEGREES, SO THEY ARE MORE ACCESSIBLE FOR C.M.M. CALIBRATION. THE BLOCK MAY BE LOCATED IN AN OUT OF THE WAY PLACE ON THE CMM TABLE, WHILE PROJECTING THE CHARACTERIZING SPHERE OUT INTO THE WORKING ZONE OF THE MACHINE. THIS ROBUST STEEL ANGLE BLOCK IS 3-1/2 INCH ( 3.5", 88.9MM ) LONG BY 1-1/2 INCH (1.5", 63.5MM ) HIGH AND 1-1/2 INCH ( 1.5", 38.1MM ) WIDE. TWO TAPPED HOLES THAT ARE M10 INCH DIAMETER ARE PROVIDED TO SECURE THE CHARACTERIZING SPHERE'S 1-1/4 INCH ( 1.25", 31.75MM ) DIAMETER POST. ONE TAPPED HOLE IS PROVIDED IN THE CENTER OF THE 1-1/2 INCH ( 1.5", 38.1MM ) LONG 45 DEGREE LAND, AND ONE IS PROVIDED IN THE TOP SURFACE NEAR THE END OPPOSITE THE 45 DEGREE ANGLE. THE BASE SURFACE THAT LOCATES THIS 45 DEGREE BLOCK HAS AREAS OF THE SURFACE RELIEVED TO LEAVE THREE MOUNTING PADS. THESE PADS ARE LAPPED FLAT AND COPLANAR TO FORM A STABLE CLAMPING SURFACE. A COUNTER BORED HOLE IS PROVIDED THROUGH THE HEIGHT OF THE BLOCK. USING THIS COUNTER BORED HOLE, THE 45 DEGREE ANGLE BLOCK IS CLAMPED SOLIDLY IN POSITION BY 3/8 INCH ( 0.375" ) OR A 10 MM SOCKET HEAD CAP SCREW. THIS 45 DEGREE BLOCK IS DESIGNED TO BE USED WITH THE 4 INCH ( 101.6 MM ) DIAMETER STEEL PLATFORM, PART NUMBER PLT4, SEE TECHNICAL DATA SHEET THE 45 DEGREE ANGLE BLOCK IS SUPPLIED WITH AN ATTRACTIVE BLACK OXIDE FINISH WHICH RESISTS CORROSION. THE 45 DEGREE ANGLE BLOCK IS GENERALLY PURCHASED WITH DUAL THREADED ADAPTOR SCREWS AND A PROBE CHARACTERIZATION SPHERE.

For more information, please visit this products webpage.
This product was added to our catalog on Thursday 29 May, 2008.
Quantity (Total Balls):
Customers who bought this product also purchased
PROBE CHARACTERIZATION SPHERE, STAINLESS STEEL, 19.05 MM, 0.75 INCHES
PROBE CHARACTERIZATION SPHERE, STAINLESS STEEL, 19.05 MM, 0.75 INCHES
PROBE CHARACTERIZATION SPHERE, RUNT, STAINLESS STEEL, 25.4 MM, 1 INCHES
PROBE CHARACTERIZATION SPHERE, RUNT, STAINLESS STEEL, 25.4 MM, 1 INCHES
SIZE AND ROUNDNESS CALIBRATION, ONE BALL
SIZE AND ROUNDNESS CALIBRATION, ONE BALL
SHORT ADAPTER SCREWS S-8M-10M
SHORT ADAPTER SCREWS S-8M-10M
PROBE CHARACTERIZATION SPHERE, RUNT, CERAMIC, 25.4 MM, 1 INCHES
PROBE CHARACTERIZATION SPHERE, RUNT, CERAMIC, 25.4 MM, 1 INCHES
SHORT ADAPTER SCREWS S-10M-10M
SHORT ADAPTER SCREWS S-10M-10M
Shopping Cart more
0 items

Copyright © 2017 Bal-tec
Powered by osCommerce