Bal-tec My Account  Cart Contents  Checkout  
  Home Page » Catalog » VB-375-CPM My Account  |  Cart Contents  |  Checkout   
Categories
Aluminum Balls
Beryllium Copper ( BECU ) Balls
Brass Balls
Castings
Chrome Steel Balls, Stock
CMM Products
Copper Balls
Hard Carbon Steel Balls, Stock
Kinematic Components
Nylon Balls, Stock
Poly Propylene Balls, Stock
Services
Soft Carbon Steel Balls, Stock ( Least Expensive )
Stainless Steel Balls, Stock
Tantalum Balls, Stock
Teflon Balls, Stock
Tools
Tungsten Carbide Balls, Stock
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
What's New? more
CHROME STEEL BALL 0.02807", 0.712978 mm Grd:25
CHROME STEEL BALL 0.02807", 0.712978 mm Grd:25
$7.5000
VEE BLOCK, 0.375" ( 3/8") CYLINDRICAL POST MOUNTED
[VB-375-CPM]
 $50.6000 

THIS DEVICE IS DESIGNED TO ACCEPT SPHERES FROM FIVE SIXTEENTHS OF AN INCH 5/16", 0.3125" ( 7.9 MM ), THREE EIGHTHS, 3/8", 0.375" OF AN INCH ( 9.5 MM) IS NOMINAL, TO ONE HALF OF AN INCH, 1/2", 0.50" (12.7 MM) IN DIAMETER. IT IS OUR PART NUMBER, VB-375-CPM.

THE CYLINDRICAL MOUNTING POST IS PRECISION GROUND TO THREE EIGHTHS (3/8") OF AN INCH ( 0.375", 9.5 MM ) DIAMETER PLUS OR MINUS 0.003 INCHES (.076 MM). THIS POST IS ONE QUARTER OF AN INCH ( 1/4", 0.250", 6.35 MM ) LONG. POST MOUNTED VEE BLOCK

THE FLAT FLANGE ADJACENT TO THE POST IS PRECISION GROUND FLAT AND SQUARE TO THE POST.

THE INCLUDED ANGLE OF THIS VEE BLOCK IS 90 DEGREES.

THIS DEVICE IS DESIGNED FOR UNIVERSAL MOUNTING FROM EITHER THE FRONT OR FROM BEHIND.

THE MAJOR DIAMETER OF THIS VEE BLOCK IS THREE QUARTERS (3/4") OF AN INCH (19 MM).

THE FLAT FACES OF THIS DEVICE ARE PRECISION GROUND WITH THE FACE OF THE GRINDING WHEEL, NOT THE PERIPHERY. THE RESULTING CRISSCROSS PATTERN BREAKS UP THE LAY OF THE SURFACE TEXTURE TO GIVE THIS COUPLE FAR SUPERIOR REPEATABILITY.

THERE IS A HOLE DRILLED THROUGH THE CENTER OF THE POST THAT IS TAPPED TO ACCEPT A # 10-24 HEXAGON SOCKET HEAD CAP SCREW, A THREADED FASTENER. THIS ALLOWS THE VEE BLOCK TO BE CLAMPED DOWN SOLIDLY FROM THE REAR END.

THIS SAME HOLE IS COUNTERBORED FROM THE FRONT, WHICH ALLOWS IT TO BE CLAMPED DOWN FROM THE FRONT BY A #6 HEXAGON SOCKET HEAD CAP SCREW.

THIS VEE BLOCK IS CONSTRUCTED FROM A VERY HIGH CHROME, HIGH CARBON, MARTENSITIC STAINLESS STEEL. THIS ULTRA FINE-GRAINED MATERIAL IS HARDENED TO A 58 HRC MINIMUM.

THESE VEE BLOCKS ARE HIGHLY MAGNETIC.

For more information, please visit this products webpage.
This product was added to our catalog on Thursday 29 May, 2008.
Quantity (Total Balls):
Customers who bought this product also purchased
MAGNETICALLY PRELOADED KINEMATIC COUPLING, 500-20-MG-S, SOUTH
MAGNETICALLY PRELOADED KINEMATIC COUPLING, 500-20-MG-S, SOUTH
MAGNETICALLY PRELOADED KINEMATIC COUPLING, 500-20-MG-N, NORTH
MAGNETICALLY PRELOADED KINEMATIC COUPLING, 500-20-MG-N, NORTH
TRUNCATED BALL, STAINLESS STEEL, 0.5000", ( 1/2"), 12.7 MM
TRUNCATED BALL, STAINLESS STEEL, 0.5000", ( 1/2"), 12.7 MM
THREADED BALL, STAINLESS STEEL, 0.375", ( 3/8" ), 9.525 MM
THREADED BALL, STAINLESS STEEL, 0.375", ( 3/8" ), 9.525 MM
TRUNCATED BALL WITH COUNTER BORED HOLE, STAINLESS STEEL, .3750", ( 3/8" ), 9.525 MM
TRUNCATED BALL WITH COUNTER BORED HOLE, STAINLESS STEEL, .3750", ( 3/8" ), 9.525 MM
TRUNCATED THREADED BALL, STAINLESS STEEL, 0.3125", ( 5/16"), 7.937 MM
TRUNCATED THREADED BALL, STAINLESS STEEL, 0.3125", ( 5/16"), 7.937 MM
Shopping Cart more
0 items

Copyright © 2024 Bal-tec
Powered by osCommerce